Name: ESC Group
Price range: $

Question 1

What is the proper vinyl sheet pile driving method for different soil types?

Accepted Answer

“Pitch and drive” method is the most practical way of pile driving in loose soils especially when using short piles.  Also called “set and drive”, this method installs piles one by one. However, with only one interlock in control, sheet piles have high tendencies of rotating from the axis and leaning forward or backward. Panel driving is recommended for the dense deposit of sands and compact cohesive soils such as heavy clay or in presence of obstructions. In this method, a number of piles are interlocked together before driving. The panel of piles is supported by guide frames and driven gradually in sequence, sometimes in a staggered manner. The method can achieve installations of longer piles in more difficult ground conditions with better results in sheet pile alignment and verticality. In cases of difficult ground conditions such as hard strata and the presence of obstructions, driving assistance is employed along with a proper selection of driving method and equipment. Jetting and drilling help by loosening or eliminating obstructions by creating pressure right under the tip of the sheet pile being driven. Long and slender PVC sheet piles require steel mandrels as supports when driven in such conditions. Mandrel, which shape is similar to sheet pile profiles, increases the rigidity of Plastic Sheet Pile and supports the weight of the driving equipment such as a vibro-hammer.

Question 2

What is the proper machine to drive piles in different conditions?

Accepted Answer

Impact driving is suitable for all soil types but appears to create the highest degree of stress to sheet piles. It is more appropriate to cohesive soils and soft soils such as silts and peats, loose medium to coarse sand, and gravels free of rock inclusions. Drop hammers such as the hydraulic hammer are the common types of impact-driving machinery. Driving using vibratory hammers is ideal for non-cohesive or granular soils such as soft soils and round-grained sand or gravel. It has also shown satisfactory performance in sandy, silty, or softer clay soils. It is less effective in angular-grained materials and soils with a firm consistency. With the introduction of vibration, however, the sub-soil can be further compacted, increasing penetration resistance and ultimately-refusal. If this is the case, driving aids like jetting and drilling might be necessary.

Question 3

What are the pvc sheet pile selection criteria for soil condition of different hardness?

Accepted Answer

General rule of the thumb: “the harder the soil, the stronger and stiffer sheet pile section should be used”. Driveability of a pile section is a consequence of its cross-sectional properties (thickness, depth, and width), designed shape, length, grade, and the applied load. Hardness of soil strata characterized by SPT or CPT values is used to predict soil resistance which is essential in the calculation of driving force to be applied. Knowing the range of force from the selected driving machine, corresponding sheet pile sections can be picked according to their yield strength and elastic modulus.

Question 4

How should I choose a sheet pile section for soils with, say, SPT Value, N=30? Can I still consider using vinyl or shift to steel?

Accepted Answer

Every sheet pile material has a design purpose, strengths, and areas of improvement. The availability of different materials denotes the need for a special material for a specific application. Plastic or synthetic sheet piles for example are known for being light and corrosion-resistant; Steel sheet piles are recognized for their extraordinary strength and versatility; and so on.

Delivering High Grade Engineered Solutions to the
Global Market for almost 40 years

Construction Solutions and Latest Updates

A Basic Guide to Steel Bridges: An Engineering Marvel

Steel Sheet Piles and their Benefits as Construction Material

What is a cofferdam, its types, and uses in the construction industry?

Why Consider Vinyl Sheet Pile as a Cost-effective Alternative to Traditional Sheet Piling Solution

An Overview of Trenching and Excavation Safety Guidelines by OSHA

A Deeper Understanding to Pipe Sizes and Pressure Ratings

Buying vs Renting Sheet Piles for Temporary Use

Important questions Worth Asking from Steel Manufacturers and Suppliers

Why Trust ESC in your Steel Fabrication Projects?

Cathodic Protection for Ships, Boats, and Vessels

Difference Between Cast Iron vs Cast Steel Bollard

Understanding Mono-Extruded and Co-extruded Vinyl Sheet Pile

Pre-Engineered Buildings vs Conventional Buildings: Which is Better?

Which Is Better, Steel or Aluminum Trench Shield?

Different types of Pile Foundation Used in Construction

Economic Contribution of Cathodic Protection Against Corrosion

Why Work with a Structural Steel Fabricator for Your Construction Project?

Construction and Excavation Safety: How to Choose the Right Trench Shield Supplier

Marine Mooring Bollard Maintenance Tips to Follow

What are the Applications of Structural Steel in the Construction Industry?

Steel Pipes: Choosing Between Seamless and Welded

The Different Types of Steel Beams and Their Applications: A Brief Guide

How Steel Corrodes?

Frequently Asked Questions About Structural Steel Fabrication