Name: ESC Group
Price range: $

Question 1

What is the proper vinyl sheet pile driving method for different soil types?

Accepted Answer

“Pitch and drive” method is the most practical way of pile driving in loose soils especially when using short piles.  Also called “set and drive”, this method installs piles one by one. However, with only one interlock in control, sheet piles have high tendencies of rotating from the axis and leaning forward or backward. Panel driving is recommended for the dense deposit of sands and compact cohesive soils such as heavy clay or in presence of obstructions. In this method, a number of piles are interlocked together before driving. The panel of piles is supported by guide frames and driven gradually in sequence, sometimes in a staggered manner. The method can achieve installations of longer piles in more difficult ground conditions with better results in sheet pile alignment and verticality. In cases of difficult ground conditions such as hard strata and the presence of obstructions, driving assistance is employed along with a proper selection of driving method and equipment. Jetting and drilling help by loosening or eliminating obstructions by creating pressure right under the tip of the sheet pile being driven. Long and slender PVC sheet piles require steel mandrels as supports when driven in such conditions. Mandrel, which shape is similar to sheet pile profiles, increases the rigidity of Plastic Sheet Pile and supports the weight of the driving equipment such as a vibro-hammer.

Question 2

What is the proper machine to drive piles in different conditions?

Accepted Answer

Impact driving is suitable for all soil types but appears to create the highest degree of stress to sheet piles. It is more appropriate to cohesive soils and soft soils such as silts and peats, loose medium to coarse sand, and gravels free of rock inclusions. Drop hammers such as the hydraulic hammer are the common types of impact-driving machinery. Driving using vibratory hammers is ideal for non-cohesive or granular soils such as soft soils and round-grained sand or gravel. It has also shown satisfactory performance in sandy, silty, or softer clay soils. It is less effective in angular-grained materials and soils with a firm consistency. With the introduction of vibration, however, the sub-soil can be further compacted, increasing penetration resistance and ultimately-refusal. If this is the case, driving aids like jetting and drilling might be necessary.

Question 3

What are the pvc sheet pile selection criteria for soil condition of different hardness?

Accepted Answer

General rule of the thumb: “the harder the soil, the stronger and stiffer sheet pile section should be used”. Driveability of a pile section is a consequence of its cross-sectional properties (thickness, depth, and width), designed shape, length, grade, and the applied load. Hardness of soil strata characterized by SPT or CPT values is used to predict soil resistance which is essential in the calculation of driving force to be applied. Knowing the range of force from the selected driving machine, corresponding sheet pile sections can be picked according to their yield strength and elastic modulus.

Question 4

How should I choose a sheet pile section for soils with, say, SPT Value, N=30? Can I still consider using vinyl or shift to steel?

Accepted Answer

Every sheet pile material has a design purpose, strengths, and areas of improvement. The availability of different materials denotes the need for a special material for a specific application. Plastic or synthetic sheet piles for example are known for being light and corrosion-resistant; Steel sheet piles are recognized for their extraordinary strength and versatility; and so on.

Entrega De Soluciones De Ingeniería de Alto Grado
Al Mercado Global Duranti casi 40 Años

Soluciones de Construcción y Últimas Actualizaciones

Equipo y Métodos de Extracción de Pilotes

Blindaje Vs. Apuntalamiento

Por qué la caja de Ropa de cama es Imprescindible para el Manejo de Agregados?

Impermeabilidad de Muros de Tablestacas

Una Guía Básica de Puentes de Acero: Una Maravilla de la Ingeniería

Tablestacas de Acero y sus Beneficios como Material de Construcción

¿Qué es una ataguía, sus tipos y usos en la industria de la construcción?

¿Por qué Considerar la Tablestaca de Vinilo como una Alternativa Rentable a la Solución Tradicional

Una descripción General de las Pautas de Seguridad para Zanjas y Excavaciones de OSHA

Una Comprensión más Profunda de los Tamaños de Tubería y las Clasificaciones de Presión

Comprar vs Alquilar Tablestacas para Uso Temporal

Preguntas Importantes que vale la pena Hcer a los Fabricantes y Poveedores de Acero

¿Por Qué Confiar en ESC para sus Proyectos de Fabricación de Acero?

Protection Cathodique pour Navires, Bateaux et Navires

Diferencia Entre el Hierro Fundido y El Bolardo de Acero Fundido

Información Sobre Tablestacas de Vinilo Monoextruido y Coextruido

Edificios Prediseñados vs Edificios Convencionales: ¿Cuál es Mejor?

¿Cuál es Mejor, un Escudo de Trinchera de Acero o de Aluminio?

Diferentes Tipos de Cimientos de Pilotes Utilizados en La Construcción

Contribución Económica de La Protección Catódica Contra La Corrosión

¿Por Qué Trabajar Con un Fabricante de Acero Estructural para su Proyecto de Construcción?

Seguridad en Excavaciones: Cómo Elegir el Proveedor Adecuado de Escudos para Zanjas

Consejos de Mantenimiento de Bolardos de Amarre Marino a Seguir

¿Cuáles son las aplicaciones del acero estructural en la industria de la construcción?